Equipment -> Telephone Systems

Here you need to enter information about your telephone system environment.

This page contains the same options as the identically titled page in the installation wizard.

Service status

This tells you whether the telephony service is online or offline.

Service start/stop button

You can choose to stop or start the CTI telephony service from this page. Typically, there would be no need to restart the telephony service during normal operation. However, if you are experiencing telephony related problems (including the inability to make or monitor calls) then you may want to try stopping and then starting the telephony service. This has no impact on actual telephone calls in progress, only the software's ability to track these calls.

Type selector

Select your PBX type in this dropdown box.

Connect to Link option

If you are connecting to your telephone system through OfficeServ Link, check this box.

IP address

If you selected the option "Connect to Link", please enter the IP address of the OS Link server, otherwise enter the IP address of the PBX.

Auto create option / Force now button

Tick Auto create to dynamically download all extensions from the PBX. If you have made changes to extensions, you can synchronize them with 'Force Now' without restarting the telephony service.

Trunk access

Enter the trunk access code used by your telephone system here (normally either 9 or 0).

Log

This panel will update as actions occur.